Control board motherboard

Material: FR4 Number of layers: 6 layers Process: Immersion Gold Minimum drilling: 0.3mm Minimum line width: 0.127mm Minimum line space: 0.127mm Features: impedance board, high reliability 【MORE】

Gold Finger PCB

Material: FR4 Number of layers: 4 layers Process: Immersion Gold Minimum Drilling: 0.2mm Minimum line width: 0.1mm Minimum line space: 0.1mm Features: gold finger, impedance board, gold finger needs bevel 【MORE】

Multilayer Immersion Gold Circuit Board

Material: FR4 Number of layers: Four layers Process: Immersion gold Minimum drilling: 0.25mm Minimum line width: 0.127mm Minimum line space: 0.127mm Features: Four-layer impedance board, non-inductive scratching is not accepted, strict appearance requirements 【MORE】

Four-layer gold finger circuit board

Material: FR4 Number of layers: four layers Process: Immersion Gold Minimum drilling: 0.2mm Minimum line width: 0.1mm Minimum line spacing: 0.1mm Features: Four-layer impedance board, gold finger, card slot tolerance +/-0.05mm, no inductive scratching is not accepted 【MORE】

High precision impedance PCB

Material: FR4-TG170 Number of layers: 8 layers Process: Immersion Gold Minimum Drilling: 0.2mm Minimum line width: 0.08mm Minimum line space: 0.08mm Features: resin plug hole, 3mil BGA clamping line, impedance board, gold finger board 【MORE】

Thick copper PCB

Material: FR4 Number of layers: 12 layers Process: Immersion Gold Minimum drilling: 0.5mm Outer copper foil: 6OZ Inner copper foil: 3OZ Board thickness: 4.0mm 【MORE】

Nickel Palladium Gold PCB

Material: FR4-S1000-2M Number of layers: 2 layers Process: Nickel Palladium Minimum drilling hole: 0.25mm Minimum line width: 0.127mm Minimum line space: 0.127mm Features: hole copper 25um, inspection under 20 times microscope does not allow the pad to be dirty 【MORE】

Electric thick gold PCB

Material: FR4-S1000-2 Number of layers: 2 layers Process: Gold-plated 30U" Minimum drilling hole: 0.25mm Minimum line width: 0.5mm Minimum line space: 0.5mm Features: Electric thick gold 30U", insulation 500MΩ@500VDC, withstand voltage 【MORE】

Coil pcb

Material: FR4 Number of layers: 6 layers Process: Immersion Gold Minimum drilling: 0.2mm Minimum line width: 0.08mm Minimum line spacing: 0.08mm Features: Coil board, each of the six layers is a coil 【MORE】